Panasonic x Arri: Software upgrade adds Arri LogC3 to Panasonic GH7 (and GH6)
When you use DPReview links to buy products, the site may earn a commission. Last week's launch of the Panasonic GH7 was exciting for video shooters, with features like 32-bit Float audio and internal ProRes RAW recording making headlines. However, Panasonic also made a parallel announcement that will turn some heads. The company has partnered with Arri, a leading manufacturer of cinema cameras, to bring Arri's LogC3 profile to the Panasonic GH7 and GH6, which will allow for color matching between those models and Arri's digital cinema cameras. Enabling the feature requires paying a license fee to Arri, so users will have to pay this fee. As a result, it should be possible to mix the GH7 into a shoot with Arri cameras, potentially offering advantages where a smaller camera is needed, such as on a small gimbal or drone. Buy now:$99 at Amazon.com$2198 at B&H Photo$2198 at Adorama Panasonic says LogC3 on the GH7 uses a curve that conforms to the standard sensitivity of ISO 800 on Arri cameras. This is the 'native' ISO of Arri cameras when shooting LogC3, with the curve giving up to 7 2/3 stops of highlights above middle grey and 6 1/3 below. Other ISO settings don't change the gain applied and simply shift the middle grey point, exchanging DR between highlights and shadows. Arri LUTs are typically calibrated to ISO 800. The GH6 and GH7 do apply differing gain between their ISO settings, meaning the same amount of highlight range is maintained. Panasonic says it has carefully calibrated each ISO setting so that the color and tone response is properly matched back to the LogC3 ISO 800 curve. This means the camera can be used at different ISO settings or in Auto ISO but still deliver footage that works well with Arri LUTs. The base ISO of the GH7 in LogC3 mode is 320 and you don't need to limit either the GH6 or GH7 to the range in which they can use their twin sensor readouts (DRBoost mode), you simply capture a stop less highlight when operating outside this range. You can use the Arri Look Library simulator to preview different Arri LUTs that can be downloaded from the Arri Look Library. This means that Panasonic users will be able to use the Arri Look Library, a library of LUTs that can be used to convert LogC3 footage to one of dozens of Arri's high-quality looks. Additionally, since the GH7 can store custom LUTs, these Look LUT files can be loaded into the camera. When combined with Panasonic's real-time LUT system, users also have the option to output a specific Arri look straight out of camera, or to proxy files. LogC3 is an optional $200 upgrade that users can install on their cameras by purchasing Panasonic's DMW-SFU3A software upgrade key. Panasonic notes that the upgrade will also work on the Lumix GH6, though without the added advantage of Panasonic's real-time LUT system. Panasonic licenses ARRI LogC3 from ARRI for the LUMIX GH7 Newark, N.J. (June 5, 2024) – Panasonic is proud to announce a new Software Upgrade Key DMW-SFU3A (sold separately) on the LUMIX GH7. With this upgrade, ARRI LogC3* is enabled, and seamless color matching with ARRI’s digital cinema cameras can be achieved. The image processing of the ARRI LogC3 curve on LUMIX GH7 has been certified by ARRI for the implementation of this function. The options for Log recording, which provides rich color information and wide dynamic range, have been expanded to include ARRI LogC3 in addition to the conventional V-Log, further improving LUMIX’s workflow compatibility. *ARRI LogC3 is a Log gamma developed by ARRI and used in ARRI digital cinema cameras. Please note: ALEXA 35 uses ARRI LogC4.*On the LUMIX GH7, ARRI LogC3 can be used for 10bit recording in Creative Video mode. 1. Video production using a wide variety of ARRI Looks Video data shot with LUMIX GH7 in ARRI LogC3 can easily be converted to your favorite look. The ARRI Look Library contains 87* high-quality ARRI Looks to choose from, and in the ARRI Look Library simulator available online, you can easily check the ARRI Look File that best fits your shooting style and scenario. It is also possible to store the LUT package for 709 conversion (ARRI Look Library LogC3 to Rec709 3D-LUTs) in the LUT Library of the LUMIX GH7 and combine it with the REAL TIME LUT function to capture videos with ARRI LUTs straight out of the camera.*As of June 5th, 2024 2. Production workflow compatible with a variety of viewing devices Using the ARRI Look Library (log-to-log), you can color grade videos recorded with ARRI LogC3 and apply the desired ARRI Look within the log space. Additionally, by using the LUT package (ARRI_LogC3_v1-2_LUT_Package) you can convert the color space of various display devices, allowing you to output the ARRI Look according to the desired color space in SDR and HDR. 3. Video production combined with ARRI digital cinema cameras Shooting in ARRI LogC3 on the LUMIX GH7 is a perfect solution for situations that require added flexibility, such as mounting on a gimbal or drone. The
 |
Last week's launch of the Panasonic GH7 was exciting for video shooters, with features like 32-bit Float audio and internal ProRes RAW recording making headlines. However, Panasonic also made a parallel announcement that will turn some heads.
The company has partnered with Arri, a leading manufacturer of cinema cameras, to bring Arri's LogC3 profile to the Panasonic GH7 and GH6, which will allow for color matching between those models and Arri's digital cinema cameras. Enabling the feature requires paying a license fee to Arri, so users will have to pay this fee.
As a result, it should be possible to mix the GH7 into a shoot with Arri cameras, potentially offering advantages where a smaller camera is needed, such as on a small gimbal or drone.
Panasonic says LogC3 on the GH7 uses a curve that conforms to the standard sensitivity of ISO 800 on Arri cameras. This is the 'native' ISO of Arri cameras when shooting LogC3, with the curve giving up to 7 2/3 stops of highlights above middle grey and 6 1/3 below. Other ISO settings don't change the gain applied and simply shift the middle grey point, exchanging DR between highlights and shadows. Arri LUTs are typically calibrated to ISO 800.
The GH6 and GH7 do apply differing gain between their ISO settings, meaning the same amount of highlight range is maintained. Panasonic says it has carefully calibrated each ISO setting so that the color and tone response is properly matched back to the LogC3 ISO 800 curve. This means the camera can be used at different ISO settings or in Auto ISO but still deliver footage that works well with Arri LUTs.
The base ISO of the GH7 in LogC3 mode is 320 and you don't need to limit either the GH6 or GH7 to the range in which they can use their twin sensor readouts (DRBoost mode), you simply capture a stop less highlight when operating outside this range.
 |
| You can use the Arri Look Library simulator to preview different Arri LUTs that can be downloaded from the Arri Look Library. |
This means that Panasonic users will be able to use the Arri Look Library, a library of LUTs that can be used to convert LogC3 footage to one of dozens of Arri's high-quality looks.
Additionally, since the GH7 can store custom LUTs, these Look LUT files can be loaded into the camera. When combined with Panasonic's real-time LUT system, users also have the option to output a specific Arri look straight out of camera, or to proxy files.
LogC3 is an optional $200 upgrade that users can install on their cameras by purchasing Panasonic's DMW-SFU3A software upgrade key. Panasonic notes that the upgrade will also work on the Lumix GH6, though without the added advantage of Panasonic's real-time LUT system.
Panasonic licenses ARRI LogC3 from ARRI for the LUMIX GH7
Newark, N.J. (June 5, 2024) – Panasonic is proud to announce a new Software Upgrade Key DMW-SFU3A (sold separately) on the LUMIX GH7. With this upgrade, ARRI LogC3* is enabled, and seamless color matching with ARRI’s digital cinema cameras can be achieved. The image processing of the ARRI LogC3 curve on LUMIX GH7 has been certified by ARRI for the implementation of this function. The options for Log recording, which provides rich color information and wide dynamic range, have been expanded to include ARRI LogC3 in addition to the conventional V-Log, further improving LUMIX’s workflow compatibility.
*ARRI LogC3 is a Log gamma developed by ARRI and used in ARRI digital cinema cameras. Please note: ALEXA 35 uses ARRI LogC4.
*On the LUMIX GH7, ARRI LogC3 can be used for 10bit recording in Creative Video mode.
1. Video production using a wide variety of ARRI Looks
Video data shot with LUMIX GH7 in ARRI LogC3 can easily be converted to your favorite look. The ARRI Look Library contains 87* high-quality ARRI Looks to choose from, and in the ARRI Look Library simulator available online, you can easily check the ARRI Look File that best fits your shooting style and scenario. It is also possible to store the LUT package for 709 conversion (ARRI Look Library LogC3 to Rec709 3D-LUTs) in the LUT Library of the LUMIX GH7 and combine it with the REAL TIME LUT function to capture videos with ARRI LUTs straight out of the camera.
*As of June 5th, 2024
2. Production workflow compatible with a variety of viewing devices
Using the ARRI Look Library (log-to-log), you can color grade videos recorded with ARRI LogC3 and apply the desired ARRI Look within the log space. Additionally, by using the LUT package (ARRI_LogC3_v1-2_LUT_Package) you can convert the color space of various display devices, allowing you to output the ARRI Look according to the desired color space in SDR and HDR.
3. Video production combined with ARRI digital cinema cameras
Shooting in ARRI LogC3 on the LUMIX GH7 is a perfect solution for situations that require added flexibility, such as mounting on a gimbal or drone. The LUMIX GH7 can easily match colors in shooting situations where cinema cameras, such as the ARRI ALEXA Mini, are used as the main camera. Furthermore, when DMW-SFU3A is installed, ARRI LogC3 in the LUMIX GH7 employs a curve that conforms to the standard sensitivity of ISO 800 of the ARRI camera. As the gamma curve does not change depending on the ISO sensitivity, users can use the same editing workflow no matter which ISO they shoot at. It also enables recording at ISO Auto, which is unique to mirrorless cameras.
In addition, ARRI LogC3 recording can also be used on the LUMIX GH6 in the same way as the LUMIX GH7 by using the Software Upgrade Key DMW-SFU3A, with the exemption of the REAL TIME LUT function which is not available on this model.
