Acer Nitro XV273U F5 gaming monitor review: One of the fastest LCDs on the planet

The number 1,000 is a benchmark goal in many disciplines. You know a car is special when it has 1,000 horsepower. An amplifier reaches a different level when it can output 1,000 watts. In computer monitor parlance, 1,000 Hz or 1 kHz is also a plateau. Remember that TVs and most displays max out at 60 Hz. But the best gaming monitors, in pursuit of higher frame rates and smoother motion, have been getting faster with each new generation.

I’ve reviewed several 500 Hz monitors, mostly LCDs, with a few OLEDs sprinkled in. But currently on my desk is Acer’s Nitro XV273U F5, which has a 1,000 Hz mode. And before I get to the caveat, know that it can refresh its screen at 540 Hz in QHD 2560x1440 resolution, so even without trickery, it’s one of the fastest flat panels you can buy. This 27-inch IPS display also features Adaptive-Sync, HDR 600, and wide gamut color. Let’s take a look.

Acer Nitro XV273U F5 Specs

So, let’s get the caveat out of the way first. The XV273U F5’s 1,000 Hz mode happens at 1280x720 resolution. That’s HD, not Full HD, which is 1920x1080. The good part is that this is a multiple of QHD’s 2560x1440. The picture becomes softer but not by as much as you’d expect. Additional video processing features include backlight strobe-based blur reduction and very precise overdrive.

The XV273U F5 also provides excellent image quality from an IPS panel, which has far higher contrast than its claimed 1,000:1 ratio. I measured just over 2,000:1 in testing, which blows away most other IPS panels for dynamic range. The black levels are almost in VA territory, resulting in a very deep, textural image. Acer gets color and gamma right as well, and with a few tweaks that I’ll show you on page four, you can enjoy reference-level accuracy. Gamut coverage is generous, with around 90% coverage of DCI-P3.

The XV273U F5 is fully ready for gaming on PC or console and has all the features to enhance gameplay at any skill level. You get plenty of aiming points and sniper modes, along with a set of timers. The overdrive and backlight strobe are enabled when your system can’t push the frame rates to 540 or 1,000, and they work extremely well, with significant blur reduction and no ghosting or phasing artifacts.

Style is not forgotten here, with a rare white aesthetic. Everything is white, including the base and the included cables. Only the thin screen bezel is black. A handy joystick controls most functions, and there are three control keys, one of which switches the refresh modes.

Connectivity includes two DisplayPorts and two HDMIs. There are no USB ports. You also get internal speakers and a headphone jack. And the ports all face backward for easy access.

The XV273U F5 isn’t a trifling purchase at $700, but if you want a 1,000 Hz monitor, they aren’t exactly common. I’m anxious to pop the hood, then take it for a spin.

Assembly and Accessories

The XV273U F5 comes simply packaged in recyclable pulp forms. A clamshell box opens to reveal four parts: the panel, upright, base, and a snap-on fulcrum. You would omit that if you wanted to use the 100mm VESA mount with an aftermarket arm or wall bracket. The cable bundle includes a white external power brick and an HDMI cable, no DisplayPort though.

Product 360

Image 1 of 3

(Image credit: Acer)

(Image credit: Acer)

(Image credit: Acer)

There’s something cool about white monitors, mostly because they are few and far between. The XV273U F5 has a nice aesthetic that balances purpose between gaming and productivity. The angular bits are reserved for the stand. The base is a metal plate with downturned corners, finished in a white powder coat. The upright has a cable hole and a few small trim pieces, with a tripod socket at the top. It features full ergonomics with a 5.9-inch height adjustment, 5/25 degree tilt, 20-degree swivel, and a 90-degree portrait mode. Movements are firm, but there’s a little play at the fulcrum point. Getting the panel level takes a bit more effort.

In the back is a large gray Nitro logo and a smooth panel shape with no angles or extra curves. The inputs face backward, making them easy to see and access. You get two DisplayPort 1.4, two HDMI 2.1, and a 3.5mm headphone jack. There are no USB ports, but there is a pair of two-watt internal speakers that play clean and politely in the upper midrange frequencies.

OSD Features

The XV273U F5’s OSD will be familiar to users of Acer monitors. It’s divided into four fields forming a logical tree and has eight sub-sections. To summon it, press the joystick twice.

Image 1 of 9

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

(Image credit: Tom's Hardware)

The first two menus are the gaming aids and video processing options. Enhancements include timers, aiming points in multiple shapes and colors, and a sniper mode. The reticle can be moved around the screen if you wish. The sniper scope has three magnifications and night vision. Video processing includes a frame counter, blur reduction with four backlight strobe pulse width levels, and a two-level overdrive. Both are very effective at reducing blur and operate artifact-free. The strobe is one of the very best I’ve seen. At its most extreme setting, it reduces light output by around 40%, but you can increase the brightness slider to compensate.

The picture menu includes the HDR modes. You get two: Auto and HDR 600. You would think they are different, but in my tests they measured the same. I noted that the XV273U F5 does not switch to HDR mode automatically; you must select one of these options after applying the signal. Also important in the menu is Max Brightness. Turn it on to get, you know…

In the Color menu are the eight picture modes arranged by game type or task. Standard is the default, but if you change any setting, the XV273U F5 switches to User. Calibration controls include seven color space options; Native is the most colorful, plus gamma and color temp presets. The RGB sliders include gain and bias adjustments for very precise grayscale tracking.

If you’re looking for the frame rate switch, it’s in the System menu, which is counterintuitive. It should be in the Gaming menu. You can also do it with the far-left control key to switch refresh rates without going into the OSD. Like most dual-mode monitors, you must initially set up each resolution in the Nvidia or AMD control panel. Then, you can make the switch on the fly. When you’ve made your settings, you can save them to the two memory locations under Save Settings to…

Acer Nitro XV273U F5 Calibration Settings

The XV273U F5 comes out of the box looking a little cool. It could probably satisfy most users, but a grayscale calibration takes it to reference level. The Native color gamut covers about 90% of DCI-P3, and an sRGB option is available. In all cases, gamma was spot-on, so I left that preset on 2.2. I had to reduce contrast by two clicks to solve a clipping issue. My suggested settings are below. For HDR, apply the signal first, then choose either Auto or HDR 600 from the Picture menu. And don’t forget to turn on Max Brightness for the XV273U F5’s max brightness.

Gaming and Hands-on

If you are a gamer looking for maximum smoothness and next-to-no input lag, and you don’t want to buy an OLED, the XV273U F5 is easily the next best thing. My perspective comes from the fact that the most prolific OLED category right now is 27-inch QHD 240 Hz. The XV273U F5 has the same size and pixel density, as well as excellent contrast and color. And it’s as smooth as a QHD 240 Hz OLED, albeit running at 540 Hz. I could do this without any problem using a GeForce RTX 4090, though given the fan noise I heard, it was working for it. But this monitor is the first LCD I would compare to an OLED for gaming feel and addictive play.

Motion blur simply did not exist at 540 Hz, and perceptually, neither did input lag. Turn-and-fire and circle strafe maneuvers were super easy and precise. I experienced very little wasted ammo. Competitive gamers will be right at home playing on an XV273U F5.

At 1,000 Hz, the story is different, but not that different. Yes, the picture is soft. It’s a bit like watching old TV shows on YouTube. You don’t enjoy them less, but by modern FHD and UHD standards, 480p is so 10 years ago. However, 1,000 fps is really something. The RTX 4090 worked even harder than before, but it managed to keep the frame rate locked at 1K. Again, there is no input lag, nor is there any blur. And even though the picture was soft, gameplay was just as addictive. It’s just so quick that some scenarios become too easy. For gamers of all skill levels, the XV273U F5 is a weapon.

I’m spoiled by OLEDs, so I won’t pretend that the XV273U F5 looks as good as them. But it’s closer to that standard than many other LCDs. It has one of the highest-contrast IPS panels I’ve seen, with a native contrast ratio around 2,000:1. That’s almost VA territory, but with better viewing angles and more saturated color. You’ll see in my test results on page four that this is a very accurate display, and it shows in practice. I noted that HDR content looked very good but had no more contrast than SDR. But with excellent luminance tracking and rich color, it provided decent impact.

For daily use, you can save a little power and run it at 120 Hz for productivity. That will get you smooth scrolling for webpages and documents. 109ppi pixel density gave me clear fonts, sharp graphics, and solid detail in small objects like icons and toolbars. Color accuracy and a useful sRGB mode provided good functionality in Photoshop.

I enjoyed the styling very much too, especially the white part. I’m a fan of white monitors, and the XV273U F5 is one of the nicer ones I’ve experienced. The rear-facing ports are super handy because they’re easy to see and reach. I’d have liked some USB ports, though. But I was glad to hear decent sound from the internal speakers. They aren’t Wilson Sashas, but they play clean and loud enough for one user.

Takeaway: The XV273U F5 is a superb gaming monitor with a gaming feel and response time on par with any OLED display. It has plenty of contrast and color too, which gives the picture impact and texture. I really enjoyed the styling and the white aesthetic. Though premium-priced, it can refresh at 1,000 Hz, and that is something rare indeed.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor